Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] easyVDR 3 clean Installation in NUC6i5SYK. Sound and remote problem.
#26
(17.11.2016, 22:35)Bleifuss2 schrieb: if the remote is dead, try restart lirc.
Code:
sudo stop lircd
sudo start lircd

Hi again.

I have tried to restart lirc, but the remote does not work neither  Sad .

Which programs (software) shoud be running in order to make work the infrared port? How can I check that all of the sofware needed is running?

[Edited:]
The output of:
Code:
easyvdr@easyvdr:~$ dmesg | grep "irc"
is:
Code:
[    6.642920] lirc_dev: IR Remote Control driver registered, major 244
[    6.650808] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[   17.450757] init: easyvdr-inputlirc main process (2068) killed by TERM signal
[   17.451206] init: easyvdr-irmplircd main process (2069) killed by TERM signal
[   17.475774] init: lircd-transmitter main process (2093) killed by TERM signal
and the output of:
Code:
easyvdr@easyvdr:~$ dmesg | grep "cir"
is:
Code:
[    6.562763] ite_cir: Auto-detected model: ITE8713 CIR transceiver
[    6.562767] ite_cir: Using model: ITE8713 CIR transceiver
[    6.562769] ite_cir: TX-capable: 1
[    6.562771] ite_cir: Sample period (ns): 8680
[    6.562773] ite_cir: TX carrier frequency (Hz): 38000
[    6.562774] ite_cir: TX duty cycle (%): 33
[    6.562776] ite_cir: RX low carrier frequency (Hz): 0
[    6.562777] ite_cir: RX high carrier frequency (Hz): 0
[    6.650658] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input4
[    6.650808] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[    6.650842] ite_cir: driver has been successfully loaded


Regards.
Javier B.
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#27
Hi again.

As I achieved to start with the remote working 1 time of 15 this morning, I recorded an easyvdrinfo file with remote working and without working, in case some difference between them can help to solve de issue.

I upload the two files in this post.

Regards.
Javier B.


Angehängte Dateien
.zip   easyinfo_V3Stable_RemoteNotWorking.zip (Größe: 78,31 KB / Downloads: 3)
.zip   easyinfo_V3Stable_WithRemoteWorking.zip (Größe: 124,04 KB / Downloads: 2)
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#28
Hi. I give you more info when remote is not working:

Code:
cat /proc/bus/input/devices
returns:
Code:
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=046d Product=404d Version=0111
N: Name="Logitech K400 Plus"
P: Phys=usb-0000:00:14.0-4:1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5
U: Uniq=
H: Handlers=sysrq kbd mouse1 event5 leds
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
B: REL=1c3
B: ABS=100000000
B: MSC=10
B: LED=1f

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

Code:
cat /etc/udev/rules.d/01-easyvdr-remote.rules
returns inside this:
Code:
#KERNELS=="input*", ATTRS{name}=="Budget-CI dvb ir receiver", SYMLINK+="input/ir-budgetCI"
#BUS=="usb", ATTRS{product}=="Griffin PowerMate", KERNEL=="event*", SYMLINK="input/powermate"
#KERNEL=="event*", SUBSYSTEM=="input", ATTRS{idVendor}=="15c2", ATTRS{idProduct}=="0034", SYMLINK+="input/touchscreen"
#KERNEL=="event*", SUBSYSTEM=="input", ATTRS{idVendor}=="0eef", ATTRS{idProduct}=="0001", SYMLINK+="input/touchscreen"
#BUS=="usb", KERNEL=="hiddev?", ATTRS{idVendor}=="0fe9", ATTRS{idProduct}=="9010", SYMLINK+="usb/DVICO"
#KERNEL=="lirc[0-9]*", NAME="lirc%n", SYMLINK=="lirc%n", MODE=="0666"
KERNEL=="event*", ATTRS{name}=="ITE8713 CIR transceiver", SYMLINK+="input/ir-auto_dtc", GROUP="vdr" # inserted_by_easyvdr-detect


Code:
easyvdr@easyvdr:~$ sudo ls -l /dev/input/
returns:
Code:
Total 0
drwxr-xr-x 2 root root     80 nov 22 09:45 by-id
drwxr-xr-x 2 root root    140 nov 22 09:46 by-path
crw-r----- 1 root root 13, 64 nov 22 09:45 event0
crw-r----- 1 root root 13, 65 nov 22 09:45 event1
crw-r----- 1 root root 13, 74 nov 22 09:46 event10
crw-r----- 1 root root 13, 75 nov 22 09:46 event11
crw-r----- 1 root root 13, 76 nov 22 09:46 event12
crw-r----- 1 root root 13, 77 nov 22 09:46 event13
crw-r----- 1 root root 13, 78 nov 22 09:46 event14
crw-r----- 1 root root 13, 66 nov 22 09:45 event2
crw-r----- 1 root vdr  13, 67 nov 22 09:45 event3
crw-r----- 1 root root 13, 68 nov 22 09:45 event4
crw-r----- 1 root root 13, 69 nov 22 09:45 event5
crw-r----- 1 root root 13, 70 nov 22 09:45 event6
crw-r----- 1 root root 13, 71 nov 22 09:45 event7
crw-r----- 1 root root 13, 72 nov 22 09:45 event8
crw-r----- 1 root root 13, 73 nov 22 09:46 event9
lrwxrwxrwx 1 root root      6 nov 22 09:45 ir-auto_dtc -> event3
crw-r----- 1 root root 13, 63 nov 22 09:45 mice
crw-r----- 1 root root 13, 32 nov 22 09:45 mouse0
crw-r----- 1 root root 13, 33 nov 22 09:45 mouse1

and
Code:
easyvdr@easyvdr:~$ udevadm info -a -p $(udevadm info -q path -n /dev/input/event3)
returns
Code:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/virtual/rc/rc0/input3/event3':
    KERNEL=="event3"
    SUBSYSTEM=="input"
    DRIVER==""

  looking at parent device '/devices/virtual/rc/rc0/input3':
    KERNELS=="input3"
    SUBSYSTEMS=="input"
    DRIVERS==""
    ATTRS{name}=="ITE8713 CIR transceiver"
    ATTRS{phys}==""
    ATTRS{uniq}==""
    ATTRS{properties}=="0"

  looking at parent device '/devices/virtual/rc/rc0':
    KERNELS=="rc0"
    SUBSYSTEMS=="rc"
    DRIVERS==""
    ATTRS{protocols}=="other unknown rc-5 nec [rc-6] jvc sony rc-5-sz sanyo sharp mce_kbd xmp [lirc]"

Can that gives you an aditional clue?

Regards.
Javier B.
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#29
Other outputs here:

Code:
udevadm info -a -p $(udevadm info -q path -n /dev/input/event12)
returns:
Code:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

 looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12/event12':
   KERNEL=="event12"
   SUBSYSTEM=="input"
   DRIVER==""

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12':
   KERNELS=="input12"
   SUBSYSTEMS=="input"
   DRIVERS==""
   ATTRS{name}=="IR-receiver inside an USB DVB receiver"
   ATTRS{phys}=="usb-0000:00:14.0-1.1/ir0"
   ATTRS{uniq}==""
   ATTRS{properties}=="0"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1':
   KERNELS=="rc1"
   SUBSYSTEMS=="rc"
   DRIVERS==""
   ATTRS{protocols}=="[rc-5] nec rc-6"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1':
   KERNELS=="1-1.1"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="00"
   ATTRS{devpath}=="1.1"
   ATTRS{idVendor}=="2304"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="4"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="500mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="a0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="0"
   ATTRS{bcdDevice}=="0100"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{serial}=="0000000M9CM1PQK"
   ATTRS{version}==" 2.00"
   ATTRS{urbnum}=="891213"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="Pinnacle"
   ATTRS{removable}=="unknown"
   ATTRS{idProduct}=="0237"
   ATTRS{bDeviceClass}=="00"
   ATTRS{product}=="PCTV 73e"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':
   KERNELS=="1-1"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="01"
   ATTRS{devpath}=="1"
   ATTRS{idVendor}=="2109"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="2"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="0mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="e0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="4"
   ATTRS{bcdDevice}=="9090"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{version}==" 2.10"
   ATTRS{urbnum}=="49"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="VIA Labs, Inc.         "
   ATTRS{removable}=="removable"
   ATTRS{idProduct}=="2812"
   ATTRS{bDeviceClass}=="09"
   ATTRS{product}=="USB2.0 Hub             "

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
   KERNELS=="usb1"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="01"
   ATTRS{devpath}=="0"
   ATTRS{idVendor}=="1d6b"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{authorized_default}=="1"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="1"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="0mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="e0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="12"
   ATTRS{interface_authorized_default}=="1"
   ATTRS{bcdDevice}=="0404"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{serial}=="0000:00:14.0"
   ATTRS{version}==" 2.00"
   ATTRS{urbnum}=="108"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"
   ATTRS{removable}=="unknown"
   ATTRS{idProduct}=="0002"
   ATTRS{bDeviceClass}=="09"
   ATTRS{product}=="xHCI Host Controller"

 looking at parent device '/devices/pci0000:00/0000:00:14.0':
   KERNELS=="0000:00:14.0"
   SUBSYSTEMS=="pci"
   DRIVERS=="xhci_hcd"
   ATTRS{irq}=="122"
   ATTRS{subsystem_vendor}=="0x8086"
   ATTRS{broken_parity_status}=="0"
   ATTRS{class}=="0x0c0330"
   ATTRS{driver_override}=="(null)"
   ATTRS{consistent_dma_mask_bits}=="64"
   ATTRS{dma_mask_bits}=="64"
   ATTRS{local_cpus}=="f"
   ATTRS{device}=="0x9d2f"
   ATTRS{enable}=="1"
   ATTRS{msi_bus}=="1"
   ATTRS{local_cpulist}=="0-3"
   ATTRS{vendor}=="0x8086"
   ATTRS{subsystem_device}=="0x2063"
   ATTRS{numa_node}=="-1"
   ATTRS{d3cold_allowed}=="1"

 looking at parent device '/devices/pci0000:00':
   KERNELS=="pci0000:00"
   SUBSYSTEMS==""
   DRIVERS==""
Code:
udevadm info -a -p $(udevadm info -q path -n /dev/input/event13)
returns:
Code:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

 looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13/event13':
   KERNEL=="event13"
   SUBSYSTEM=="input"
   DRIVER==""

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13':
   KERNELS=="input13"
   SUBSYSTEMS=="input"
   DRIVERS==""
   ATTRS{name}=="IR-receiver inside an USB DVB receiver"
   ATTRS{phys}=="usb-0000:00:14.0-1.2/ir0"
   ATTRS{uniq}==""
   ATTRS{properties}=="0"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2':
   KERNELS=="rc2"
   SUBSYSTEMS=="rc"
   DRIVERS==""
   ATTRS{protocols}=="[rc-5] nec rc-6"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2':
   KERNELS=="1-1.2"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="00"
   ATTRS{devpath}=="1.2"
   ATTRS{idVendor}=="2304"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="6"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="500mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="a0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="0"
   ATTRS{bcdDevice}=="0100"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{serial}=="0000000M8CI1LE9"
   ATTRS{version}==" 2.00"
   ATTRS{urbnum}=="888347"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="Pinnacle"
   ATTRS{removable}=="unknown"
   ATTRS{idProduct}=="0237"
   ATTRS{bDeviceClass}=="00"
   ATTRS{product}=="PCTV 73e"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':
   KERNELS=="1-1"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="01"
   ATTRS{devpath}=="1"
   ATTRS{idVendor}=="2109"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="2"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="0mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="e0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="4"
   ATTRS{bcdDevice}=="9090"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{version}==" 2.10"
   ATTRS{urbnum}=="49"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="VIA Labs, Inc.         "
   ATTRS{removable}=="removable"
   ATTRS{idProduct}=="2812"
   ATTRS{bDeviceClass}=="09"
   ATTRS{product}=="USB2.0 Hub             "

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
   KERNELS=="usb1"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="01"
   ATTRS{devpath}=="0"
   ATTRS{idVendor}=="1d6b"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{authorized_default}=="1"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="1"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="0mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="e0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="12"
   ATTRS{interface_authorized_default}=="1"
   ATTRS{bcdDevice}=="0404"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{serial}=="0000:00:14.0"
   ATTRS{version}==" 2.00"
   ATTRS{urbnum}=="108"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"
   ATTRS{removable}=="unknown"
   ATTRS{idProduct}=="0002"
   ATTRS{bDeviceClass}=="09"
   ATTRS{product}=="xHCI Host Controller"

 looking at parent device '/devices/pci0000:00/0000:00:14.0':
   KERNELS=="0000:00:14.0"
   SUBSYSTEMS=="pci"
   DRIVERS=="xhci_hcd"
   ATTRS{irq}=="122"
   ATTRS{subsystem_vendor}=="0x8086"
   ATTRS{broken_parity_status}=="0"
   ATTRS{class}=="0x0c0330"
   ATTRS{driver_override}=="(null)"
   ATTRS{consistent_dma_mask_bits}=="64"
   ATTRS{dma_mask_bits}=="64"
   ATTRS{local_cpus}=="f"
   ATTRS{device}=="0x9d2f"
   ATTRS{enable}=="1"
   ATTRS{msi_bus}=="1"
   ATTRS{local_cpulist}=="0-3"
   ATTRS{vendor}=="0x8086"
   ATTRS{subsystem_device}=="0x2063"
   ATTRS{numa_node}=="-1"
   ATTRS{d3cold_allowed}=="1"

 looking at parent device '/devices/pci0000:00':
   KERNELS=="pci0000:00"
   SUBSYSTEMS==""
   DRIVERS==""

Code:
udevadm info -a -p $(udevadm info -q path -n /dev/input/event14)
returns:
Code:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

 looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14/event14':
   KERNEL=="event14"
   SUBSYSTEM=="input"
   DRIVER==""

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14':
   KERNELS=="input14"
   SUBSYSTEMS=="input"
   DRIVERS==""
   ATTRS{name}=="IR-receiver inside an USB DVB receiver"
   ATTRS{phys}=="usb-0000:00:14.0-1.3/ir0"
   ATTRS{uniq}==""
   ATTRS{properties}=="0"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3':
   KERNELS=="rc3"
   SUBSYSTEMS=="rc"
   DRIVERS==""
   ATTRS{protocols}=="[rc-5] nec rc-6"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3':
   KERNELS=="1-1.3"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="00"
   ATTRS{devpath}=="1.3"
   ATTRS{idVendor}=="2304"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="8"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="500mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="a0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="0"
   ATTRS{bcdDevice}=="0100"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{serial}=="0000000M09S0BEU"
   ATTRS{version}==" 2.00"
   ATTRS{urbnum}=="919865"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="Pinnacle"
   ATTRS{removable}=="unknown"
   ATTRS{idProduct}=="0237"
   ATTRS{bDeviceClass}=="00"
   ATTRS{product}=="PCTV 73e"

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':
   KERNELS=="1-1"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="01"
   ATTRS{devpath}=="1"
   ATTRS{idVendor}=="2109"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="2"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="0mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="e0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="4"
   ATTRS{bcdDevice}=="9090"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{version}==" 2.10"
   ATTRS{urbnum}=="49"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="VIA Labs, Inc.         "
   ATTRS{removable}=="removable"
   ATTRS{idProduct}=="2812"
   ATTRS{bDeviceClass}=="09"
   ATTRS{product}=="USB2.0 Hub             "

 looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
   KERNELS=="usb1"
   SUBSYSTEMS=="usb"
   DRIVERS=="usb"
   ATTRS{bDeviceSubClass}=="00"
   ATTRS{bDeviceProtocol}=="01"
   ATTRS{devpath}=="0"
   ATTRS{idVendor}=="1d6b"
   ATTRS{speed}=="480"
   ATTRS{bNumInterfaces}==" 1"
   ATTRS{bConfigurationValue}=="1"
   ATTRS{bMaxPacketSize0}=="64"
   ATTRS{authorized_default}=="1"
   ATTRS{busnum}=="1"
   ATTRS{devnum}=="1"
   ATTRS{configuration}==""
   ATTRS{bMaxPower}=="0mA"
   ATTRS{authorized}=="1"
   ATTRS{bmAttributes}=="e0"
   ATTRS{bNumConfigurations}=="1"
   ATTRS{maxchild}=="12"
   ATTRS{interface_authorized_default}=="1"
   ATTRS{bcdDevice}=="0404"
   ATTRS{avoid_reset_quirk}=="0"
   ATTRS{quirks}=="0x0"
   ATTRS{serial}=="0000:00:14.0"
   ATTRS{version}==" 2.00"
   ATTRS{urbnum}=="108"
   ATTRS{ltm_capable}=="no"
   ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"
   ATTRS{removable}=="unknown"
   ATTRS{idProduct}=="0002"
   ATTRS{bDeviceClass}=="09"
   ATTRS{product}=="xHCI Host Controller"

 looking at parent device '/devices/pci0000:00/0000:00:14.0':
   KERNELS=="0000:00:14.0"
   SUBSYSTEMS=="pci"
   DRIVERS=="xhci_hcd"
   ATTRS{irq}=="122"
   ATTRS{subsystem_vendor}=="0x8086"
   ATTRS{broken_parity_status}=="0"
   ATTRS{class}=="0x0c0330"
   ATTRS{driver_override}=="(null)"
   ATTRS{consistent_dma_mask_bits}=="64"
   ATTRS{dma_mask_bits}=="64"
   ATTRS{local_cpus}=="f"
   ATTRS{device}=="0x9d2f"
   ATTRS{enable}=="1"
   ATTRS{msi_bus}=="1"
   ATTRS{local_cpulist}=="0-3"
   ATTRS{vendor}=="0x8086"
   ATTRS{subsystem_device}=="0x2063"
   ATTRS{numa_node}=="-1"
   ATTRS{d3cold_allowed}=="1"

 looking at parent device '/devices/pci0000:00':
   KERNELS=="pci0000:00"
   SUBSYSTEMS==""
   DRIVERS==""
Code:
ps aux | grep "lircd"
returns
Code:
root      2247  0.0  0.0  33112  3868 ?        Ss   10:39   0:00 /usr/sbin/lircd -n --output=/var/run/lirc/lircd --driver=devinput --device=/dev/input/ir-auto_dtc

Javier B.
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#30
Hello Javier

First we musst check what's the right event, and if it work's allways.
You can test with this command:


Code:
sudo cat /dev/input/event3


If you press a button on the remote control you must see any output on the terminal.

I'm not sure that event3 ist the right event.

Here can you look for the event number:


Zitat:H: Handlers=sysrq kbd mouse0 event4



Zitat:I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10


I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10


Good luck

Bleifuss
Produktiv-VDR:
Board GA H77-DS3H, Intel Intel® Core™ i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J  2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0
Zitieren
#31
Hi.

I have tested the whole bunch of events, with no luck in any of them:
Code:
easyvdr@easyvdr:~$ sudo cat /dev/input/event3
[sudo] password for easyvdr:
easyvdr@easyvdr:~$ irw
easyvdr@easyvdr:~$ sudo cat /dev/input/event12
easyvdr@easyvdr:~$ sudo cat /dev/input/event13
easyvdr@easyvdr:~$ sudo cat /dev/input/event14
easyvdr@easyvdr:~$ sudo cat /dev/input/event2
easyvdr@easyvdr:~$ sudo cat /dev/input/event4
easyvdr@easyvdr:~$ sudo cat /dev/input/event5
easyvdr@easyvdr:~$ sudo cat /dev/input/event6
easyvdr@easyvdr:~$ sudo cat /dev/input/event7
easyvdr@easyvdr:~$ sudo cat /dev/input/event8
easyvdr@easyvdr:~$ sudo cat /dev/input/event9
easyvdr@easyvdr:~$ sudo cat /dev/input/event10
easyvdr@easyvdr:~$ sudo cat /dev/input/event11
easyvdr@easyvdr:~$ sudo cat /dev/input/event0
easyvdr@easyvdr:~$ sudo cat /dev/input/event1
easyvdr@easyvdr:~$ sudo cat /dev/input/event3
easyvdr@easyvdr:~$ sudo cat /dev/input/ir-auto_dtc
easyvdr@easyvdr:~$ sudo cat /dev/input/mice
easyvdr@easyvdr:~$ sudo cat /dev/input/mouse0
easyvdr@easyvdr:~$ sudo cat /dev/input/mouse1

Those commands did not return anything when I pressed the remote keys.

Regards.
Javier B.
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#32
Hi again.

May be I just have found out what is happening.

After booting, I have connected by ssh and I have run those commands:
Code:
easyvdr@easyvdr:~$ sudo modprobe -r ite_cir
easyvdr@easyvdr:~$ sudo modprobe ite_cir

And... the remote started working as it should be.

Someone has any idea about how to make the solution persistent after reboot?

Thanks and regards
Javier B.
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#33
Zitat:Someone has any idea about how to make the solution persistent after reboot?


OK that's no Problem, but where is the error?

Please post this file form both installations:

Code:
/etc/lirc/hardware.conf
Produktiv-VDR:
Board GA H77-DS3H, Intel Intel® Core™ i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J  2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0
Zitieren
#34
(23.11.2016, 15:22)Bleifuss2 schrieb: Please post this file form both installations:
Code:
/etc/lirc/hardware.conf
Hi.

Here you have. But they seem equals in both systems.

Regards.
Javier B.


Angehängte Dateien
.txt   hardware.conf_easyVdr3-Alpha2.txt (Größe: 1,31 KB / Downloads: 2)
.txt   hardware.conf_easyVdr3-Stable.txt (Größe: 1,31 KB / Downloads: 2)
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#35
Hello Javier

I think you need a workaround ...


Code:
sudo su
echo modprobe -r ite_cir >/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
echo modprobe ite_cir >>/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
chmod ugo+x /usr/share/vdr/before-vdr-hooks/1-reloadite_cir

I hope it works

Thank you for your help

Regards

Bleifuss
Produktiv-VDR:
Board GA H77-DS3H, Intel Intel® Core™ i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J  2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0
Zitieren
#36
(25.11.2016, 20:19)Bleifuss2 schrieb: I think you need a workaround ...
Code:
sudo su
echo modprobe -r ite_cir >/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
echo modprobe ite_cir >>/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
chmod ugo+x /usr/share/vdr/before-vdr-hooks/1-reloadite_cir

Hi, Bleifuss2.
With this workaround easyvdr starts till the screen with the easyvdr boot logo. Remote works, but I can not whatch tv. I only can change to Kodi with pChanger, but if I try to return to vdr, nothing is showed.

I tried this workaround also, and it seem to work. I added in "/etc/rc.local" this:
Code:
sleep 3
modprobe -r ite_cir
sleep 2
modprobe ite_cir

But I do not know if this workaround is permanent, can you tell me if it can be erased/restored (rc.local) after some update?

Thanks a lot and regards.
Javier B.
VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT − DDR4  || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || easyVdr 3.0  
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || yaVdr 0.6 
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || VDR-NG-EM 0.6 Pro - Rev 844
Zitieren
#37
Hello
Nice that it is now with you running
For whoever gave up has already lost
greeting
Oberlooser
K +
EA4 Test-VDR : Lintec Senior Gehäuse - MSI G41M-P25 Board - Intel P4 E8500 / 775 Dual Core CPU - 2x2GB DDR3 RAM - MSI GT 710 PCI-e HDMI Grafik - DVB Sky S952 Twin SAT PCI-e - 1TB Test-HDD - LG GH24NS01 DL DVD - USB-STM32 V2 Stick (36kHz) mit SMK RC6 MCE 50GB Fernbedienung - EasyVDR 4.0  - Softhddevice mit Pulseaudio und estuary4vdr OSD - Kodi 18.4 mit Confluence Skin
VDR-Client,s : Media MVP Scart, VIP BOX 1903, 1910 , EasyStream 0.6-18 für WIN 10, Raspberry PI 3 mit OpenElec 7.01 und TotalControl FB Code 0104 Lirc an Tsop 31238
Zitieren
#38
Hi Javier,

(26.11.2016, 15:09)jb schrieb: But I do not know if this workaround is permanent, can you tell me if it can be erased/restored (rc.local) after some update?
rc.local is permanent  - after upgrade will not erased!

Regards
Wolfgang

Zitieren


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste